FlexiDisplay* - The ADJUSTABLE Display StandIn June 2006, Lost and Found Toys, Inc. acquired the rights to manufacture the FlexiDisplay stand. Although the stand was originally intended for airplane models, the stand can be used for a variety of toys such as Macross Valkyries and Star Wars Vehicles (Hasbro and Lego!). Each stand comes in a box with three rods, three washers, three screws, a cover plate and a base plate. Instructions for assembly are included. Click here for a complete review by Rebelscum.com - Star Wars Collecting News    Click here for an updated review by IPMS/USA - International Plastic Modelers' Society Click here for an updated review by Hyperscale.com - The Online Resource for Aircraft & Armour Modellers FlexiDisplay v2   
As you can see we have made some major changes to the rods, bumpers, cover plate and base. The rod and ball joint are now one solid piece of acrylic so metal sleeves are no longer required. Black bumpers have been replaced by clear ones to avoid scuff marks on models/toys. Screws sit flush inside the cover plate for a cleaner look. To help keep price down the base is no longer a solid piece of acrylic. Last but not least, new packaging was created to help you find the stands at your local hobby store. ***Due to a manufacturer error the wrong screws were packaged with the stand. Use the set of screws attached to the outside of the packaging and discard the set inside.*** FlexDisplay stands can also be purchased at the following retailers: Would you like your favorite hobby shop, online retailer or convention exhibitor to carry FlexiDisplays? Have them contact us sales@laftoys.com. Description: Adjustable Aircraft Stand Materials: Mainly acrylic; rods reinforced at the base with aluminum inserts and topped with rubber bumpers. How does it work? Rods are adjustable to various positions. Adjustable rods allow models of different sizes and shapes to be supported and displayed. Rubber bumpers located on the tips of the rods support and grip model without damaging it. Dimensions: Base: 4 x 4 inches, ½ inch in thickness Rods: 2.5, 4 or 6 inches in height Weight: ¾ lb Maximum suggested weight of model: 2 lbs Works best with 1/48 & 1/32 and larger 1/72 & 1/144 Scale Models *patent pending |
